FERRARI 308

Sorry,
deze auto staat niet meer in onze virtuele showroom te blinken....

De verkoper heeft het zoekertje offline gehaald of de auto is ondertussen verkocht.
Geen paniek: er zijn nog veel meer pareltjes te vinden op VROOM.be!
Kijk dus gerust nog wat verder rond.

Bekijk gelijkaardige zoekertjes
€ 62.500
Auto opslaan
Dino GT4 V8 2+2 "Bertone" | 81.214 km | 1980

The Dino 308 GT4 was introduced at the Paris Motor Show in November 1973. The 308 GT4 finally gained the “Prancing Horse” badge in May 1976, which replaced the Dino badges on the hood, wheels, rear panel and the steering wheel. This has caused major confusion over the years by owners, enthusiasts and judges. During the energy crisis at that time many prospective owners were hesitant to buy such an expensive automobile not badged “Ferrari” being confused at the significance of the Dino name. Dino was Enzo Ferrari’s son who died in 1956, and his name was to honor his memory on the models it was placed.In an effort to improve sales until the 1976 official re-badging, Ferrari sent out factory update #265/1 on July 1, 1975 with technical and cosmetic revisions in many areas. Some of these revisions were implemented piecemeal by dealers. Some made all the revisions while some just made a few. This leaves many 1975 GT4’s with a variety of modifications which are hard to document as “correct” to aficionados who may not understand the complicated series of events surrounding this model year. Some of the revisions included adding Prancing Horse badges, repainting in the Boxer two-tone scheme (lower half painted matte black), air conditioning fixes, etc. It also included bumper modification and exhaust changes for North American versions. The Dino 308 GT4 was the only Ferrari legally imported to the US in 1975, and it was also the year Niki Lauda won the Formula One drivers championship and Ferrari won the constructors title. The GT4 was the only 2+2 Ferrari ever raced with factory support.There were two series of GT4; the earlier cars featured a twin distributor engine and foglamps mounted in the front valance. Later cars had a single distributor engine, with foglamps mounted behind the front grille.SpecificationsThe chassis was a tubular spaceframe based on the Dino 246, but was stretched for a 2,550.20 mm wheelbase to make room for the second row of seats. The suspension was fully independent, with double wishbones, anti-roll bars, coaxial telescopic shock absorbers and coil springs on both axles. Niki Lauda helped set up the chassis.The 3.0 L (2926.90 cc) V8 was mounted transversally integrally joined with the 5-speed transaxle gearbox. It fitted 205/70VR14 Michelin XWX The engine had an aluminium alloy block and heads, 16-valves and dual overhead camshafts driven by toothed belts; it produced 256 hp (188 kW) in the European version. The induction system used four Weber 40 DCNF carburetors.This particular example of the Dino 308 GT4 2+2 was supplied to France in 1980 and sold new by Ferrari dealer, “Charles Pozzi”.Finished in “Silver Metallic” with a two tone, Blue with Beige interior, showing 81,214 km on the odometer, this car has been well looked after and maintained.

Meer informatie

Carrosserievorm: CoupéTransmissie: 5 versnellingen, HandgeschakeldAantal cilinders: 8Interieur: darkBlue, Leder/alcantaraAlgemene staat: goedTechnische staat: goedOptische staat: goedAantal sleutels: 2

Forme de carrosserie: CoupéTransmission: 5 vitesses, Commande manuelleNombre de cylindres: 8État général: bonÉtat technique: bonÉtat optique: bonNombre de clés: 2

Specificaties

  • Merk FERRARI
  • Model 308
  • Carrosserie Hatchback
  • Versnellingsbak Manueel
  • Brandstof Benzine
  • Kilometerstand 81.214 km
  • CC 2926 cm3
  • Vermogen 256 pk (188 kW)
  • Euronorm --
  • Kleur Zilver
  • Bekleding Synthetisch leder
  • BTW Niet inbegrepen
  • Geregistreerd op 10/1980
  • Publicatiedatum 19 augustus 2021
label Car-Pass
De verkoper is verplicht je een Car-Pass te geven Meer lezen

Uitrusting

  • Air conditioner
  • Metaalkleur

The Dino 308 GT4 was introduced at the Paris Motor Show in November 1973. The 308 GT4 finally gained the “Prancing Horse” badge in May 1976, which replaced the Dino badges on the hood, wheels, rear panel and the steering wheel. This has caused major confusion over the years by owners, enthusiasts and judges. During the energy crisis at that time many prospective owners were hesitant to buy such an expensive automobile not badged “Ferrari” being confused at the significance of the Dino name. Dino was Enzo Ferrari’s son who died in 1956, and his name was to honor his memory on the models it was placed.In an effort to improve sales until the 1976 official re-badging, Ferrari sent out factory update #265/1 on July 1, 1975 with technical and cosmetic revisions in many areas. Some of these revisions were implemented piecemeal by dealers. Some made all the revisions while some just made a few. This leaves many 1975 GT4’s with a variety of modifications which are hard to document as “correct” to aficionados who may not understand the complicated series of events surrounding this model year. Some of the revisions included adding Prancing Horse badges, repainting in the Boxer two-tone scheme (lower half painted matte black), air conditioning fixes, etc. It also included bumper modification and exhaust changes for North American versions. The Dino 308 GT4 was the only Ferrari legally imported to the US in 1975, and it was also the year Niki Lauda won the Formula One drivers championship and Ferrari won the constructors title. The GT4 was the only 2+2 Ferrari ever raced with factory support.There were two series of GT4; the earlier cars featured a twin distributor engine and foglamps mounted in the front valance. Later cars had a single distributor engine, with foglamps mounted behind the front grille.SpecificationsThe chassis was a tubular spaceframe based on the Dino 246, but was stretched for a 2,550.20 mm wheelbase to make room for the second row of seats. The suspension was fully independent, with double wishbones, anti-roll bars, coaxial telescopic shock absorbers and coil springs on both axles. Niki Lauda helped set up the chassis.The 3.0 L (2926.90 cc) V8 was mounted transversally integrally joined with the 5-speed transaxle gearbox. It fitted 205/70VR14 Michelin XWX The engine had an aluminium alloy block and heads, 16-valves and dual overhead camshafts driven by toothed belts; it produced 256 hp (188 kW) in the European version. The induction system used four Weber 40 DCNF carburetors.This particular example of the Dino 308 GT4 2+2 was supplied to France in 1980 and sold new by Ferrari dealer, “Charles Pozzi”.Finished in “Silver Metallic” with a two tone, Blue with Beige interior, showing 81,214 km on the odometer, this car has been well looked after and maintained.

Meer informatie

Carrosserievorm: CoupéTransmissie: 5 versnellingen, HandgeschakeldAantal cilinders: 8Interieur: darkBlue, Leder/alcantaraAlgemene staat: goedTechnische staat: goedOptische staat: goedAantal sleutels: 2

Forme de carrosserie: CoupéTransmission: 5 vitesses, Commande manuelleNombre de cylindres: 8État général: bonÉtat technique: bonÉtat optique: bonNombre de clés: 2

Verkoper

  • Classic Youngtimers Consultancy
  • Koperslagerstraat
    5405BE Uden

Aanbevolen nieuwe auto's voor jou

Meer nieuwe auto's

Benzine, Automaat

€ 26.950

Benzine, Automaat

€ 32.295
2021
25 km

Elektrisch, Automaat

€ 119.990
2021
16 km

Benzine, Manueel

€ 22.695
2021
15 km

Aanbevolen tweedehands auto's voor jou

Meer tweedehands auto's

Benzine, Andere

€ 11.999
2017
84.777 km

Benzine, Manueel

€ 14.999
2017
81.172 km

Diesel, Manueel

€ 29.575
2019
36.775 km

Diesel, Automaat

€ 17.500
148.000 km